Setting Up Printing For Mac
Wireless printers can be used in a home office or business office so that one printer can service many computers. With a wireless printer, you can print documents from a Mac computer without directly connecting the computer to the printer.
. If you want to use the wireless network using the infrastructure mode, make sure that the network cable is disconnected from the machine. Using the WPS (PBC) button or entering the PIN from the computer to connect to the access point (or wireless router) varies depending on the access point (or wireless router) you are using.
Refer to the user's guide of the access point (or wireless router) you are using. When using the WPS button to set the wireless network, security settings may change. To prevent this, lock the WPS option for the current wireless security settings. The option name may differ depending on the access point (or wireless router) you are using.
Choosing your type There are two methods available to connect your machine to a wireless network using the (WPS) button on the control panel. The Push Button Configuration (PBC) method allows you to connect your machine to a wireless network by pressing both the (WPS) button on the control panel of your machine and the WPS (PBC) button on a Wi-Fi Protected Setup™ WPS-enabled access point (or wireless router) respectively. The Personal Identification Number (PIN) method helps you connect your machine to a wireless network by entering the supplied PIN information on a Wi-Fi Protected Setup™ WPS-enabled access point (or wireless router).
Factory default in your machine is PBC mode, which is recommended for a typical wireless network environment. For Windows 8, If the installation window does not appear, from Charms, select Search Apps and search for Run. Type in X: Setup.exe, replacing “X” with the letter that represents your CD-ROM drive and click OK. If “ Tap to choose what happens with this disc.” pop-up window appears, click the window and select Run Setup.exe.
Setting Up Wireless Printer On Mac
Review and accept the installation agreements in the installation window. Then, click Next. Select Wireless network connection on the Printer Connection Type screen. Then, click Next. Enter the wireless Network Name: Enter the SSID of the access point (SSID is case-sensitive). Operation Mode: Select Infrastructure.
Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network.
WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on a WPA Pre-Shared Key. This uses a shared secret key (generally called Pre Shared Key pass phrase), which is manually configured on the access point and each of its clients. Encryption: Select the encryption (None, WEP64, WEP128, TKIP, AES, TKIP AES). Network Password: Enter the encryption network password value.
Confirm Network Password: Confirm the encryption network password value. WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index. Wi-Fi Direct option appears on the screen only if your printer supports this feature. Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager (see ). Wi-Fi Direct Name: The default Wi-Fi Direct Name is the model name and the maximum length is 22 characters. Password setting is the numeric string, and the size is 8 64 characters. When the wireless network set up is completed, disconnect the USB cable between the computer and machine.
Follow the instructions in the installation window. For Windows 8, If the installation window does not appear, from Charms, select Search Apps and search for Run.
Type in X: Setup.exe, replacing “X” with the letter that represents your CD-ROM drive and click OK. If “ Tap to choose what happens with this disc.” pop-up window appears, click the window and select Run Setup.exe. Review and accept the installation agreements in the installation window. Then, click Next. Select Wireless network connection on the Printer Connection Type screen.
Then, click Next. For Windows 8, If the installation window does not appear, from Charms, select Search Apps and search for Run. Type in X: Setup.exe, replacing “X” with the letter that represents your CD-ROM drive and click OK. If “ Tap to choose what happens with this disc.” pop-up window appears, click the window and select Run Setup.exe. Review and accept the installation agreements in the installation window.
Then, click Next. Select Wireless network connection on the Printer Connection Type screen. Then, click Next. Enter the wireless Network Name: Enter the SSID name you want (SSID is case-sensitive). Operation Mode: Select ad hoc. Channel: Select the channel.
( Auto Setting or 2412 MHz to 2467 MHz). Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key can access the network. Encryption: Select the encryption (None, WEP64, WEP128). Network Password: Enter the encryption network password value. Confirm Network Password: Confirm the encryption network password value. WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index. The wireless network security window appears when the ad hoc network has security enabled.
Select Open System or Shared Key for the authentication and click Next. For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window.
If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP). For the Static method If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window.
If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. For example, If the computer’s network information is as shown follows. For Mac OS X 10.8, double-click the CD-ROM that appears on Finder. Double-click the MACInstaller folder Installer OS X icon. Click Continue.
Read the license agreement and click Continue. Click Agree to agree to the license agreement.
Click Install. All components necessary for machine operations will be installed.
Mac Default Printer Settings
If you click Customize, you can choose individual components to install. Enter the password and click OK. Select Configuration of Wireless network on the Printer Connection Type and click Continue. Enter the wireless Network Name: Enter the SSID of the access point (SSID is case-sensitive). Operation Mode: Select Infrastructure.
Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used.
A device that has a proper WEP key can access the network. WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on the WPA Pre-Shared Key. This uses a shared secret key (generally called Pre Shared Key pass phrase) that is manually configured on the access point and each of its clients.
Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES, TKIP, AES).
Network Password: Enter the encryption network password value. Confirm Network Password: Confirm the encryption network password value. WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index.
The wireless network security window appears when the access point has security enabled. Enter the Network Password of the access point (or router). The window showing the wireless network setting appears. Check the settings and click Next. Wi-Fi Direct option appears on the screen only if your printer supports this feature. Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager (see ). Wi-Fi Direct Name: The default Wi-Fi Direct Name is the model name and the maximum length is 22 characters.
Password setting is the numeric string, and the size is 8 64 characters. The Wireless Network Setting Complete window appears.
When the wireless network settings are completed, disconnect the USB cable between the computer and machine. For Mac OS X 10.8, double-click the CD-ROM that appears on Finder. Double-click the MACInstaller folder Installer OS X icon.
Click Continue. Read the license agreement and click Continue.
Click Agree to agree to the license agreement. Click Install.
All components necessary for machine operations will be installed. If you click Customize, you can choose individual components to install. Enter the password and click OK. Select Configuration of Wireless network on the Printer Connection Type and click Continue. For Mac OS X 10.8, double-click the CD-ROM that appears on Finder. Double-click the MACInstaller folder Installer OS X icon.
Click Continue. Read the license agreement and click Continue. Click Agree to agree to the license agreement.
Click Install. All components necessary for machine operations will be installed.
If you click Customize, you can choose individual components to install. Enter the password and click OK. Select Configuration of Wireless network on the Printer Connection Type and click Continue. Enter the wireless Network Name: Enter the SSID name (SSID is case-sensitive). Operation Mode: Select ad hoc. Channel: Select the channel ( Auto Setting or 2412 MHz to 2467 MHz).
Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. Encryption: Select the encryption (None, WEP64, WEP128). Network Password: Enter the encryption network password value.
Confirm Network Password: Confirm the encryption network password value. WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index. The wireless network security window appears when the ad hoc network has security setting. Select Open System or Shared Key for the authentication and click Next. For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window.
If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP). For the Static method If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. For example, If the computer’s network information is shown as follows. IP address: 169.254.133. 43.
Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.). Gateway: 169.254.133. 1.
When the window that tells you that the network cable connection is confirmed appears, disconnect the network cable and click Next. If the network cable is connected, it may have trouble finding the machine when configuring the wireless network. The wireless network connects according to the network configuration. Wireless network set up is completed. After installation is finished, click Quit.
I have two OS X 10.3.4 systems and two linux boxes. One linux box is RedHat 8.0 and the other is SuSE Pro 9.1. One of the Macs is serving a Cannon i550 printer. The configuration of the printer for the Macs was the most 'plug and play' I have ever seen on any system. I did nothing the OS did it all. Now I want to serve the printer to the two linux boxes. What do I need to do?
Am I gonna have an issue because the macs do postscript conversion internally? All comments welcome john - ############################# # John N. Alegre # Andante Systems # St. Paul, Minnesota #############################.